Wednesday 14 January 2009


UV Layout


Normal Direction


Inverted bumping

Wednesday 27 February 2008

Barn Interior Textured

The last I saw of the barn interior, I'd modelled pretty much most of it but it still required a few extra assets just to give it some clutter. This was to be down to Luke to do. When I got it back, a few more assets had been added in the form of, buckets, ladders, and wires dangling from the ceiling. My main task now was to texture the damn thing. It definitely took a while due to the number of objects within the environment but supprisingly, it didn't actually take as long as I though to texture the bulk of it due to the fact that alot of things simply needed to be duplicated. The chicken coops were the first on the list. I'd also reduced the poly count a little by using flat poly-grids for the bars instead of actual cylinder ones. The main chicken coop however, was remodelled and given a higher poly count since it would be seen from a close angle. Here is what the overall interior scene looked when I got it back pre-textured.




You may have noticed that monstrosity at the back. It was supposed to be some sort of egg-collecting machine. Originally it looks like a giant fire-hydrant with a hole in the middle. I really didn't think this was very interesting and thought that it could be made into something more than just a piece of scenery. I had this idea of making it look like some kind of monster which looked as if it was devouring the eggs. What I had in my head was something like a demon fireplace, and this was the basis of its design. It is actually animated, with the two pistons at either sides pumping up and down in an alternating pattern. I'll get into this more later. Back to the barn.

What you'll see below are some test renders of the barn fully textured.




These are just some preliminary lighting tests that i was messing around with. I was trying to get a really moody low-light feel.




My idea was to try and create a Tim Burton-esque sort of look. Very atmospheric, with lots of low intensity lights highlighting key spots of the scene. I think shadows is a major factor that needs to be played with here, but it's tricky trying to get that type of effect whilst still trying to show as much of then environment as possible.




The image above is a render from the main chicken coop, so this would be the main character's view of the rest of the barn from his cage.




This one was just me messing around with the whole light and shadow thing, relying more on the specularity of the objects rather than the actual light to define the scene. I made it black and white in photoshop cause I thought it looked cool. That's pretty much it. Looks nice though. I think.



Ahhh, the notorious demon egg eating machine that lives at the back of the barn. As I said before it was originally was just meant to be some sort of machine that collects the eggs from the conveyor belt, but I thought this was too boring. I may not be able to corrupt the cute and cudliness of this film into a Silent Hill/ texas Chainsaw Massacre-esque film, but I can damn well try. This little monster is my contribution and personal attempt to drag this film away from the sickeningly cute/funny/giggley/full of gags/slapstick comedy lump of turd that's no diferent to the countless sickeningly cute/gigley/full of gags/slapstick comedy, lumps of turds already out there! In effect, this is my expression of disgust towards the cute fluff that seems to be circulating out there. (If they'd only allowed me the use of blood and gore! But alas, my laments go unheard.)


Anyway, the image above is the finished model, fully textured and everything. There is actually a piece of graffitti on it that says "feed me!" but you can't see it cause it's behind some other geometry. Bad texturing on my part. Consider it an easter egg. For you uneducated heathens, an 'easter egg' is a piece of information or little joke that developers usually hide in a game wating to be discovered by some unwitting gamer.

More rendering tests. Nuff said.


What your bulging man-eyes will see below should you take the time to waste enough energy to scroll down are some renders of random pieces of machinery that will clutter the interior of the barn. Don't ask what they do for god sake, I made em' up as I modelled them, suffice to say that they do things.






The image above, is the main chicken coop. I remodelled this with higher detail and polycount as it's going to be seen from a close range. Things that were just bump maps on other coops are actual geometry on this one. Cause it's special. Unlike you.
Below are just some random clutter which will fill up space in the barn. Not much to say. Seen one stack of barrells/boxes, seen em' all right? Right.


Behold! Doors!

Wednesday 19 December 2007

Truck Creation

After the exterior model of the barn, my next assigned task was to build the truck. The initial idea was to have a really old, rusty truck to fit in with the farm environment. We wanted to go with a old fashioned vintage look. The image below is the original inspiration for the truck.



Early during the modelling stage however, it became evident that it wasn't turning out very well. I wasn't happy with the way it was going, as it didn't come across as enough of rickety old banger. the problem was that it had too low a ground clearance, which actually made it look quite stable. Also, with the current model (below), I knew there would be problems with the 'jiggle' dynamics brought about by the vehicle's aging suspension. The wheels were simple too close to the frame which would mean that if the car 'jiggled', the wheels would hit or worse, pass through the frame. The whole thing needed to be higher.



Enter old rusty rickety truck mark II (below). This new design deviates from the original picture, however is more practical and just generally more aesthetically pleasing as a model. It resembles an old military transport truck more than the original image, although I kept the front as I wanted to keep to the whole vintage look. The body no had a higher ground clearance, and the wheels had enough space for the body to bounce around when the truck is in motion. The cage as the back would also be jiggle around while the truck's moving.

The image below is a more developed version. Luke pointed out that with the previous model (above), the underside looked empty and needed something to fill in the space. My original intention was to occupy that space with random components, such as pipes, oil tanks, tubes, etc. However, Luke recomended that I should just have the same design on the front on the back end as well. I think this actually looks better than having random machinery at the botom. This was done literally by duplicating the body, flipping it around 180 degrees, then cutting and merging it into place. This gives the truck a more solid body and also avoids me putting in uneccessary detail on the underside.

I also applied an ambient occlusion map on the model by baking out a light map and applying it as a texture. This just gives me a rough idea of what it'll look once AO has been applied. Texturing-wise, it's also very handy as it shows you exactly which parts of the mesh is elevated and which parts are sunken, making it easier to paint in shadows and details like scratches and such.

This next image is a partially textured version of the truck. This is still under heavy construction in terms of texture design. I knew I was going for the brown and rusty look, but at this stage I was still messing about with actual details on the texture such as bolts, metal plates, etc.

Originally, the truck was split into four UV sets, each taking up its own quadrant in the texture editor. My reasoning for this was that in order for the truck to have as much detail and definition, each texture would have to be massive. It was originally 4 x (2048 x 2048). This of course is massive, plus I was unhappy with the way I'd mapped the whole thing as I was getting some really ugly seams at very exposed areas. It was simply more work to try and hide them, than to simply re-map the whole thing. This actually didn't take too long to do, and once the UV sets were layed out, I now only had two UV sets. One was for the body, cage, and cavas cover, which was a 2048 texture, and the other was for all the random bits and pieces on the underside of the truck such as wheels, drive shafts, mudflaps etc. This latter texture was only a 1024 x 1024. Although you can clearly see the difference in quality between the two texture sizes, once it was rendered with a bit of lighting, this actually became less and less noticable. Even more so if the truck is animated.

These four images were experiments of the different colours scheme of the truck. The differences aren't very definable in this picture, but they are blue, red, brown, and grey. This was Luke's idea, as aparently the orginal one was too brown and needed more colour. The cheek! He said he wanted it to be more red. After some faffing around in Photoshop, I came up with a mock up to which he said "hmmmm....nah actually I rather like that first one you did to be honest". Aparently it was too red. Back to the original brown it is. That said, I realised that it wasn't actually the red that made it too agressive, it was the amount of rust and grunge detail that I'd put on the texture. There was so much rust that it already looked as if it was going to crumble into dust any second, so I toned it down sinificantly, and adjusted the contrast levels in Photoshop to make it slightly lighter.

This is a displacement map test I was playing around with. If you can't tell, it's the bolts and that long metal bar thing sticking out of the bonnet that's been displaced. Otherwise the whole thing is just texture. I abandoned the idea of using Displacement Maps since I thought that the truck's only going to be featured in the opening scene, and even then you'll never actually be close enough to notice any displacement. It would've therefore been a waste of time, and would have bumped up rendering time that little bit more, so I'm sticking to the modest bump map for this one. With Specular too of course.

This is a 'test render' of the fully textured version. The underside is still unfinished at this stage, plus the windows need some alpha maps for transparency. I just wanted to see how it'd look under a production quality render with mental ray. This took roughly 20-25 seconds, which isn't too bad considering the opening scene is only going to be so many frames.

There is something which really drove me crazy about this, and that's the quality of the render. For some reason, it looks infinitely more clear and crisp under hardware render in the viewport, than with actual mental ray itself. Mental ray seems to to blur out the texture unless the camera's literally right next to the model. After tweaking every setting in mental ray and yielding very little results, I gave up.....

.....or did I?! The image below if the fully finished version (minus rigging and dynamics). As you can see, it's definitely much more crisp and sharp than the mental ray version. This image also has an AO pass over it set at multiply. However, the sharpness wasn't achieved with the mighty mental ray, but with the ever humble and user friendly Adobe Photoshop. Basically what I'll just have to do is create an Action in Photohsop which will in turn apply the same filter to every frame of the render. Sorted!

This is a quick dynamics test I did. It utilises a very simple rig; the crate is attached to the main body, and the main body is in turn attached to the underside frame, therefore, once in motion, if the underside stops abruptly, the main body jerks forward and jiggles, and the cage in turn jerks and jiggles. The jiggle effect is done through the use of hair follicles attached to the rig.

This is basically ready for use in the scene. If needs be, it can be tweaked very easily.

Saturday 15 December 2007

Environment Design (Buildings - Barn)

During the animating stage, since I wasn't assigned to work on the animatic, and since I'd already done my share of the concept work, Luke gave me the go-ahead to start on the barn. the look and style of the barn was already agreed so there was little or no changes to be expected in the design.



This is the first mock up of the barn. The shape and design were final, but the placement of the assets such as pipes and other details were left to my own creative design. The over-all look is still loyal to the initial concept, which was an old ricktety structure of wood, but augmented heavily with rusty pipes and machinery. My personal view on the barn, was that it's a place of evil and death. I wanted to convey a sense of uneasiness and anxiety upon seeing it which is why I incorporated the heavy machinery. In effect, it's fuction is more of a factory rather than a chicken coop.

With regards to polycount and detail, I allowed myself to break free of my usual 'low-poly' style of modelling. The barn will only be in the opening scene, and even then, will only be in view for a few seconds, thus rendering it won't compose of too many frames. The structure itself is still very low-poly, but the roundness and complex shapes of the pipes demanded higher poly counts in order to maintain their shape without becoming blocky or jagged. True to the low-poly modeller's maxim, I'd normally compensate this jaggy-ness with some good texturing, but in this case it's not necessary to do so.




This is a textured version of the barn, not yet employing the use of bump or specular maps. I created the textures in photoshop, using multiple layers of stock textures and editing them as necessary. Due to its size, my main concern that the texture would look stretched and blurry with a 1024 x 1024 texture. True enough it did, and so I bumped it up to 4096 x 4096. This is massive, I know, which is gonna kill me come render time. Another problem was that in order for the UV sets to have as much pixels as posible, I used not one, but 4 texture maps, each in their own separate quadrants. That's 4 quadrants of 4096 x 4096 textures!!! And that's just for the colour map. Including bump and specular maps, that's three 4096's for every quadrant!!!





This is a test render set on 'preview' quality. It took around a minute, which isn't too bad considering the amount of detail in the scene. Render-wise, it's still feasable, and I can always down-size the textures if worst comes to worst. At present, it doesn't seem necessary.


This is actually the very first piece of the barn which I textured. It's a 2048 x 2048 texture, but I think this can be brought down to 1048 and still retain its quality. It's just an asset anyway. Probably wondering what the hell it is huh? I'm not really sure, but I designed it as a tank containing toxins and other noxious liquids which are pumped into the barn for whatever reason. I just wanted to give the barn a 'factory' look, like a chemical plant. Whatever it is, it's supposed to imply that whatever's going on in that barn is not good. The text on the side says "Killer Carbide", from the Bhopal incident involving a leak at a chemical plant. It just sounded cool and evil and stuff.

These next two images, are higher quality render's. As honor demands, I must admit that I didn't light the scene. Lighting is courtesy of Ajdin Brujca from 2nd year. The backgrounds of course are fake. The scenery and grass were done in photoshop. I wanted to see what the barn would look like within context so i grabbed some images from google and wove them into the scene, then applied a 'warm' photo-filter to the whole thing to achieve cheap sunset lighting. Fairly happy with the over-all look, but needs more tweaking naturally.



The following images are from the interior of the barn. I started working on these because there wasn't anything for me to do at the time, but was reproached for speeding ahead. My orders were to 'slow down', and I was re-allocated to helping with more immediate work for the presentation. Stuff which should've been finished weeks ago by people who were charged with doing them, but aren't due to certain persons not pulling their weight!

Anyway, the design of the coop are loosely based on the original concept. I say 'loosely' since the original concept was never finalised, which meant that interpretation of the interior's design was once again left to my personal creativity. My idea was to make it look as uncomfortable as possible. The first thing that I thought of was a prison block, hence the multiple levels. I also wanted to look like a production line, which is what it basically was anyway. The initial idea was that each cage was like a prison cell, with a hole in the centre. The chickens would sit over the hole, and lay eggs which would fall down and roll on to a conveyor belt which transported them to a big collection machine at the back. That's the thing that currently looks like a giant fire-hydrant. That's not final of course. Mainly, i was just trying to establish the layout and overall feel. This scenery is therefore still subject to heavy change. However, what is shown here is where I left off. This scene is now being continued by Luke and Samir, but will be sent back to me for texturing.

A word on polycount. Thus far, this has been a low-poly modeller's nightmare. It simply couldn't be done in low poly without sacrificing detail and definition. The bars on the cage themselves, being cylinders, demanded a hefty 20 polygons each! The poly count for the scene is hovering around a quarter of a million. That said, it can still be cut down of course. With regards to the bars, the only solution I can think of is to have the main chicken's cell composed of actual polygons, while the bars on all the other coops will simply be single plane poly's with alpha mapping. Hopefully they should be unnoticable enough from the distance, since the main focus will be on the chicken anyway. The dark lighting should also help hide any cheapness to the scene.


Saturday 27 October 2007

More Chicken Concepts

The image above is Luke's design of the cockrell, coloured and textured by yours truly (naturally). What I like about this design compared to mine is that is actually bears resemblance to the chicken before it turns into a cockrell, which I think gives it a sense of continuity. My only criticism is that it doesn't look 'macho' enough.



The Images above and below were my designs for how the chicken would look during the egg robbery scene. There were mixed opinions as to which was best. Most of the other students I asked seem to prefer the 'Splinter Cell' look (Bottom), where as the tutors seems to prefer the more traditional robber look (Above). At the moment, we'd decided to go with the latter as it seems to fit in more with the look that we're aiming for. Also, we realised that not everyone will recognise the Splinter Cell outfit and so won't fully apreciate the connection.



All the images below were all coloured in Photoshop.






The fat hens above are colour variants of a 'veteran' hen who will feature in the barn scene. She'll be laying eggs at a rapid rate, making the main character even more anxious t lay an egg. These were pencil drawn by Luke, which I then coloured in Photoshop. Same with the next two images below.

These are the designs for the other hens in the barn. We're planning to have one or two more variants which will be duplicated throughout the hatchery.




I decided to add the shelf and cubicles in photoshop to give the concept more of a context. The shelf designs however, do not reflect the final design or layout of the barn.







These are my design for the possible look of the farmer. We originally decided not to actually feature the farmer, but to just be a silhoutte in the background as a means of building up the tension. However, a change in the animatic means he'll be brought back in the picture, to actually make an appearance at the beggining. The images above are my personal designs on the farmer's body. The ones below are obviously designs on his actual appearance. The previous farmer designs were aparently too graphic and 'heavy' looking, so i decided to tone down the muscle and brutality. When Luke asked me to create some more designs, I imediately invisioned four different types. There's was the tall and skinny, the muscular and powerful, the fat and slow, and the old and creepy.


Everyone seems to favour the whole old and skinny and huchbacked design. I'm fine with it, but personally I don't find it imposing or intimidating enough. I believe the farmer needs to instill fear and terror. However this would be 'inappropriate' in a happy family film! (>.<)


With regarsd to the heads, there were three main designs; the bulbous and mutated, the cruel and menacing (yes I know! The 2nd one is basically woverine from X-Men!), and finally the old and wrinkled.


These images below are my personal take on what the final cockrell might look like. We are still generally leaning towards Luke's first design, but I thought it was definitely worth exploring other designs so we'd have something to compare the first one with.

I personally wanted the cockrell to be much bigger and more well built than Luke's design. The way I saw it was that it would be more of a transformation to go from the skinny weakling that the chicken was, into a big muscly, powerful cockrell. However, i'm not sure if I went a little too far. Afterall, he's only turning into a cockrell, not the incredible Hulk. Still....food for thought eh?